The setup of the Novastar asynchronous control software

The setup of the Novastar asynchronous control software Control system is an important part of the LED screen, which it is to LED screen what brain is to human body. It mainly contains the hardware (sending & Receiving cards) and software (installed in the computer), I am going to say something regarding the setup of the software as below for your reference.

1.First, open the Novastar asynchronous software “PlutoManager V4.5.2” and then the interface as below.

2.Second, enter and start to setup from here,

3.And then the interface will be as below,

4.Brightness adjustment. You can adjust the brightness via the software manually scheduled or automatically, the process as the following screenshot shows.
(1)Adjust the brightness manually.

(2)Adjust brightness scheduled, please operat just as screenshot showed setp by step.

(3)Adjust brightness automatically, but you need to use the light sensor.

5.Power on & off the LED screen periodically. The steps as below,

6.Revise the IP of the control card. The procedures as below,
(1)First, click Read.

(2)Second, revise IP.

(3)Third, click Apply.

(4)Fourth, Click Read again.

We will regularly update the similar products articles on the website to inform you our LED screens & the technology articles of the control system to teach you the software setup, please visit our pages here for more information.